Tube Cutter 1/4" (6.3mm) to 3" (76mm) (TC-300)
Ships direct from the manufacturer — please allow up to 10 business days, though it often ships sooner, then goes out via the shipping service you select at checkout. This item does not ship from our warehouse, so delivery times may vary.
Couldn't load pickup availability
Ships direct from the manufacturer. Please allow up to 10 business days, though it often ships sooner.
A fiber duct with cable already inside can't be cut with anything that reaches past the wall, and the Jonard Tools TC-300 is the tool that doesn't: a wheel-type tube cutter that makes a radial cut on copper, brass, aluminum, and plastic tubes from 1/4 to 3 in (6.3 to 76 mm) in diameter by scoring the wall deeper with each turn until it parts, without touching anything inside. Four roller bearings hold the tube square while the cutting wheel works around it, a quick-release push button disengages the tool from the pipe when the cut is done, and a reamer stored in the handle takes the burr off the cut end. The cutting wheel comes out without tools, and a spare TC-300RB blade is stored in the knob so a dull wheel is a minute's interruption. It's the large duct cutter in Jonard's TK-260 duct kit, sold here on its own, and it's backed by a lifetime warranty.
Features
- Cuts 1/4 to 3 in tube. Radial cuts on copper, brass, aluminum, and plastic tubes from 6.3 to 76 mm, including fiber optic duct, without damaging what's inside.
- Four roller bearings. Hold the tube securely in place while cutting, so the wheel tracks in one groove rather than spiraling.
- Quick-release push button. Disengages the tool from the pipe quickly and easily when the cut is through.
- Reamer in the handle. Removable, stored in the handle, for deburring and reaming the cut end.
- Tool-free wheel change, spare included. The cutting wheel comes out without tools, and a spare TC-300RB replacement blade is stored in the knob.
- Lifetime warranty.
Where It Fits
It suits blown-fiber and microduct crews cutting large duct to length or opening it at mid-span with cable already inside, where a saw or a shear would damage the fiber, outside plant teams working HDPE and PVC conduit up to 3 in, plumbers and HVAC technicians cutting copper and plastic pipe, who will recognize the tool, anyone whose duct cutters stop at 64 mm and who meets 3 in duct, and the duct kit it comes in, since the TC-300 is the large tube cutter in Jonard's TK-260.
Good to Know
Open the tool wide enough to clear the tube, seat the tube against the roller bearings, and tighten the knob until the wheel just bites; then rotate the tool around the tube and tighten a little more each turn, letting the wheel score deeper on every pass rather than forcing it through in one. Too much pressure per turn is what crushes a thin-walled plastic duct or leaves a spiral groove on copper. When the wall parts, press the quick-release button to back the tool off. Pull the reamer from the handle and take the burr off the inside of the cut end, since a burr inside a fiber duct is the first thing the cable catches on and a burr inside copper is a flow restriction; then blow or tap the shavings out before anything goes in. On duct with cable inside, the wheel-type cut is the whole reason to use this tool rather than a shear, but still stop as soon as the wall parts and don't run an extra turn. Change the wheel when it starts to wander or push the wall in rather than score it; the spare is in the knob and the swap needs no tools, and order another TC-300RB so the knob isn't empty. The tool is for round tube only; it won't cut square conduit or anything flat. At nearly two pounds it's a van tool more than a pouch tool, which is where the TK-260 keeps it.
Specifications
| Spec | Detail |
|---|---|
| Model | TC-300 |
| Manufacturer | Jonard Tools |
| Type | Tube cutter, wheel type |
| Cut Type | Radial |
| Capacity | 1/4 to 3 in (6.3 to 76 mm) |
| Materials Cut | Copper, brass, aluminum, plastic; fiber optic duct |
| Tube Support | 4 roller bearings |
| Release | Quick-release push button |
| Reamer | Removable, stored in handle |
| Cutting Wheel | Tool-free removal; spare TC-300RB stored in knob |
| Finish | Powder coated |
| Warranty | Lifetime |
| Dimensions | 9 × 4 × 1 in (22.9 × 10.2 × 2.5 cm) |
| Weight | 1.93 lb (876 g) |
| Shipping | Ships direct from the manufacturer, allow up to 10 business days |
Documentation
| Document | Link |
|---|---|
| Data Sheet | TC-300 data sheet (PDF) |