CAT6A Double Shielded Ethernet Patch Cable - S/FTP

SKU: C6ASSB-1RED
Regular price $3.15
Length
Color
Payment methods
  • Ach Direct Debit
  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Usually ships within 1–2 business days, then goes out via the shipping service you select at checkout.

This is the double-shielded Cat6A patch cord. Each of the four pairs is wrapped in its own foil, and a braid goes over all four, which is the S/FTP construction, the most shielding a twisted-pair cord gets. The foil keeps the pairs from talking to each other and to the pairs in the cord next to them, which is the alien crosstalk that limits 10 Gigabit in a dense bundle, and the braid gives the whole cord a low-resistance shield against the noise from motors, lighting, power cable, and radio gear. The conductors are 26 AWG stranded bare copper, so the cord stays flexible and there's no copper-clad aluminum in it. The plugs are fully shielded RJ45 with a metal housing that bonds the braid to the jack at both ends, gold-plated contacts, and a molded snagless boot that covers the latch. It's wired T568B, rated to 500 MHz for 10GBASE-T, and it carries 2.5 and 5 Gigabit and PoE++ to 100 W as well. The jacket is PVC for indoor use. It's ETL Verified and RoHS compliant. It comes in 11 lengths from 1 to 100 feet and 9 colors, and it ships in 1 to 2 business days. Pick the length and color from the menus above. For the same 10 Gigabit link without shielding, the C6AMB; for a thinner shielded cord where space is the problem, the 28 AWG U/FTP C6ASLSS; for the panel on the other end, the PP6ASR-24 shielded Cat6A patch panel; for a shielded plug to make up your own cords, the CAT6ASH-PLG and the CAT6AFLX-S.

Features

  • S/FTP double shielding. Foil around every pair plus an overall braid, against EMI, RFI, and alien crosstalk.
  • 10GBase-T rated, 500 MHz. It also runs 5G, 2.5G, and Gigabit links.
  • 26 AWG stranded bare copper. No copper-clad aluminum; flexible enough to dress into a rack.
  • Fully shielded RJ45 plugs. Metal housing bonds the shield at both ends; gold-plated contacts.
  • Molded snagless boot. It protects the latch when you pull the cord through a bundle.
  • PoE++ to 100 W. IEEE 802.3bt.
  • T568B wiring. Indoor PVC jacket; ETL Verified, RoHS.
  • 11 lengths, 9 colors. 1 to 100 feet; black, blue, gray, green, orange, purple, red, white, and yellow.

Where It Fits

It suits a shielded Cat6A plant where every link from the panel to the switch has to carry the shield through, so the 10 Gigabit channel is shielded end to end. It suits a factory floor, a plant room, or a broadcast rack where a cord runs beside power, drives, or RF gear and an unshielded cord picks up noise. Data center and server room techs use it for top-of-rack and panel-to-switch patching in dense bundles where alien crosstalk is the limit at 10 Gigabit, and so do integrators on hospital, trading floor, and pro A/V installs that specify shielded copper. A PoE++ run to a high-power access point or a PTZ camera head in a noisy space is a candidate. It goes with the shielded Cat6A keystones, panels, and bulk cable from the copper collections, and with the other Cat6A cords. For an unshielded plant, the C6AMB. For a slimmer shielded cord, the C6ASLSS. For the panel, the PP6ASR-24. For field-terminated shielded plugs, the CAT6ASH-PLG and CAT6AFLX-S.

Good to Know

Shielding only works when it's grounded: the braid and the foils drain through the plug's metal housing into the jack, so this cord belongs on shielded jacks, shielded patch panels, and shielded switch ports, with a continuous path to ground on both ends, and on an unshielded port it's just a stiffer Cat6A cord. Use it on both ends of the link, or the channel is only as shielded as its weakest cord. The S/FTP braid makes the cord thicker and less willing to bend than a U/FTP or unshielded cord, so give it a wider bend radius in the cable manager and don't force it around a tight corner; where room is the problem and the noise is moderate, the slim 28 AWG U/FTP C6ASLSS fits where this one won't. The 10GBASE-T rating is for the cable; the 100 meter figure is the channel limit on a permanent link, and a patch cord is one piece of that channel, so the longest length here is 100 feet. 26 AWG stranded copper is the right gauge for PoE++: it runs cooler in a bundle than the slim 28 AWG cords and has less resistance per foot, so a 100 W device at the far end gets what it's rated for. The jacket is rated for indoor use; for a plenum or riser pathway, ask us about the fire rating before you order. Wiring is T568B at both ends; it mates with T568A jacks on the other end without harm, since the pairs land on the same pins. Clean the dust off the plug before it goes into a switch, and label both ends if the cord disappears into a bundle. It usually ships in 1 to 2 business days.

Specifications

Spec Detail
Series C6ASSB
Category Cat6A, TIA/EIA-568-C.2
Shielding S/FTP: foil on each pair plus overall braid
Performance 500 MHz; 10GBase-T, 5GBase-T, 2.5GBase-T, 10/100/1000
Conductors 26 AWG stranded bare copper, 4 pairs / 8 conductors
Jacket PVC, indoor
Connectors Fully shielded RJ45, metal housing, gold-plated contacts
Boot Molded snagless strain relief
Wiring T568B
PoE IEEE 802.3bt PoE++, up to 100 W
Lengths 1, 2, 3, 5, 7, 10, 15, 25, 50, 75, and 100 ft
Colors Black, blue, gray, green, orange, purple, red, white, yellow
Compliance ETL Verified, RoHS
Shipping Usually ships in 1 to 2 business days