CableSaber™ 4 mm - 28.6 mm (AST-200)

SKU: AST-200 UPC: 811490018716
Regular price $157.95
Payment methods
  • Ach Direct Debit
  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Ships direct from the manufacturer — please allow up to 10 business days, though it often ships sooner, then goes out via the shipping service you select at checkout. This item does not ship from our warehouse, so delivery times may vary.

Ships direct from the manufacturer. Please allow up to 10 business days, though it often ships sooner.

Armored and thick-jacketed cable is where the small slit and ring tools give up, and the Jonard Tools CableSaber AST-200 is built for exactly that cable: mid-span access on armored or heavy-jacketed cable from 4 mm to 28.6 mm (0.157 to 1.125 in) in diameter. The blade sets longitudinal for slitting or radial for ringing, so the same tool makes both cuts an entry needs, and a thumb screw adjusts the depth by hand up to 5.5 mm (0.216 in), deep enough for armor and thick sheath but set to stop short of the fibers. The anodized aluminum shaft keeps the tool tracking straight down the cable rather than spiraling, the shaft housing doubles as a handle for leverage on a long slit, and the blade is a precision nickel-molybdenum low-alloy steel (MIM-4680), heat-treated to 55+ HRC, which is what it takes to cut armor repeatedly without going dull.

Features

  • Armored and thick-jacketed cable, 4 mm to 28.6 mm. Mid-span slit and ring access on the heavy cable that smaller tools won't bite: corrugated and interlocking armor, thick outdoor sheath, and large-count distribution and backbone cable up to 1.125 in.
  • Slits and rings with one blade. Set the blade longitudinal for a slit down the cable or radial for a ring cut around it.
  • Blade depth to 5.5 mm, set by thumb screw. Adjust the cut depth quickly by hand to match the sheath or armor, with no tools needed.
  • Aluminum shaft prevents spiraling. The shaft holds the tool square to the cable so a long slit runs straight instead of corkscrewing around it.
  • Shaft housing is the handle. Gives leverage for slitting heavy jackets and a comfortable grip for ringing.
  • MIM-4680 nickel-molybdenum steel blade. Heat-treatable low-alloy steel hardened to 55+ HRC for high-wear cutting, so it cuts the toughest materials cleanly and leaves the fibers inside untouched.
  • Anodized aluminum and steel construction. Built for durability in daily field use.

Where It Fits

It suits outside plant and splicing crews opening armored distribution and backbone cable at closures and vaults, campus and industrial installers working with armored fiber in plenum and direct-burial runs, utility and transit fiber work where the cable is big, armored, and expensive to get wrong, anyone doing mid-span entries on cable above the range of the MS-series slit and ring tools, and the fiber kits that carry it, since the CableSaber is the long-slit tool in Jonard's TK-107B and TK-199B backpack kits.

Good to Know

Set the blade depth on a scrap of the same cable before the first live cut, or on the end of the cable if there's spare: start shallow, add depth with the thumb screw until the blade just clears the armor or sheath, and stop there, since the aim is to cut the outer layer and nothing underneath. On armored cable, the depth has to clear the armor but not the inner jacket or the buffer tubes, and on corrugated armor the depth that works on the ridge is deeper than the trough, so check the cut rather than assuming it. For a mid-span entry, make the two ring cuts first with the blade set radial, then switch to longitudinal and slit between them, keeping the shaft flat against the cable so the cut runs straight; peel the sheath in sections and watch for the armor edges, which are sharp once cut. Wear gloves and eye protection on armored cable; cut armor cuts hands. The tool starts at 4 mm, so drop and small distribution cable are a job for the CSR-1575 or the MS-series tools, and above 28.6 mm it's a different tool. Keep the blade clean and check it for chips after armored work; a blade that drags instead of cuts is one to replace rather than press harder.

Specifications

Spec Detail
Model AST-200
Manufacturer Jonard Tools
Type CableSaber mid-span cable slit and ring tool
Cut Type Slit, ring
Cable Type Armored, jacketed
Cable Diameter 4 to 28.6 mm (0.157 to 1.125 in)
Maximum Blade Depth 5.5 mm (0.216 in)
Blade Adjustment Thumb screw, set by hand
Blade Orientation Longitudinal (slit) or radial (ring)
Blade Material Nickel-molybdenum low-alloy steel (MIM-4680), heat treated, 55+ HRC
Body Material Anodized aluminum and steel
Dimensions 7 × 2 × 1 in (17.8 × 5.1 × 2.5 cm)
Weight 0.75 lb (340.5 g)
Shipping Ships direct from the manufacturer, allow up to 10 business days

Documentation

Document Link
Data Sheet AST-200 data sheet (PDF)
Instructions AST-200 instructions (PDF)