CAT7 CMR Riser Cable 1000ft - S/FTP Dual-Shielded, 23AWG Solid Copper 10G

Elevate your indoor networking with our high-performance CAT7 Dual-Shield Riser-Rated Ethernet Cable, engineered for flawless 10GBASE-T speeds and maximum noise rejection in demanding environments. Featuring S/FTP double shielding (foil per pair + overall braid), premium heavy-duty 23 AWG solid bare copper conductors, and a flame-retardant UL-rated CMR PVC jacket, this 10Gb CAT7 cable ensures superior signal integrity, low attenuation, and reliable PoE++ support for vertical shafts and in-wall installations, ideal for data centers, broadcast studios, medical facilities, and industrial control rooms seeking uncompromised 1,000MHz bandwidth and EMI/RFI protection.

Designed for the most demanding vertical installations requiring ultimate performance, this ultra-premium cable combines four exceptional features rarely found together: CAT7 Class F performance (1,000 MHz), CMR fire rating for vertical runs, S/FTP dual shielding for maximum EMI immunity, and heavy-duty 23 AWG conductors for superior performance. The S/FTP shielding provides individual foil on each pair PLUS an overall tinned-copper braid for class-F noise immunity—the highest level of interference protection available in riser-rated cable. Exceeding ISO/IEC 11801 Class F and ANSI/TIA-568.2-D standards with UL-CMR certification, it's the ultimate solution for multi-story buildings requiring fire-safe vertical 10 Gigabit distribution with maximum EMI immunity.

Key Features

• Advanced S/FTP double shielding for maximum EMI/RFI protection
• Individual aluminum-mylar foil shield on each of 4 pairs
• Overall, the tinned-copper braid shield encases the entire cable
• Class-F noise immunity eliminates EMI/RFI interference and crosstalk
• Highest level of shielding available for riser-rated cable
• Perfect for high-noise vertical shafts in multi-story buildings
• Heavy-duty 23 AWG solid bare copper conductors (thicker than standard 24AWG)
• Low resistance for cooler PoE++ operation and minimal attenuation
• Extended PoE++ reach over long vertical runs
• Efficient data transmission over extended distances
• 1,000MHz bandwidth (CAT7 Class F specification)
• Built to ISO/IEC 11801 Class F standards
• Exceeds ANSI/TIA-568.2-D requirements
• Supports 10GBASE-T (10 Gigabit Ethernet) up to 100 meters
• PoE++ (IEEE 802.3bt) compatible with extended reach thanks to 23AWG
• Backward compatible with Gigabit Ethernet, Fast Ethernet, TP-PMD/CDDI
• Future-proof connectivity beyond 10G
• UL-rated CMR (Communications Riser) flame-retardant PVC jacket
• Safe for vertical shafts and in-wall installations in non-plenum spaces
• Meets strict fire codes for floor-to-floor runs
• Durability and code compliance for multi-story buildings
• Integrated drain wire bonds shield to ground post-termination
• Prevents static buildup and maintains signal stability
• Sequential footage markers for organized, accurate measurements
• Sturdy 1000ft wooden spool for tangle-free long pulls
• Professional-grade for mission-critical installations

Ideal Applications

• Multi-story data centers with 10G vertical distribution
• Broadcast studios and television production facilities with riser runs
• Medical facilities requiring vertical 10G and EMI protection
• Hospitals with riser shafts and sensitive equipment
• High-rise office buildings with 10G backbone requirements
• Research facilities with vertical runs and interference concerns
• Industrial control rooms require maximum shielding
• Commercial buildings with floor-to-floor 10G distribution
• Vertical riser shafts in electrically noisy environments
• In-wall installations requiring a CMR rating and maximum performance
• Any vertical installation requiring CAT7 performance and fire safety
• Multi-story buildings with extreme EMI concerns

Cable Type & Construction

• Standard: CAT7 (Class F)
• Type: Riser-Rated (CMR), Dual-Shielded
• Shielding Type: S/FTP (Shielded/Foiled Twisted Pairs)
• Individual Shield: Aluminum-mylar foil on each pair
• Overall Shield: Tinned-copper braid encasing all pairs
• Pairs: 4 twisted pairs, each individually shielded
• Total Conductors: 8
• Installation: Vertical riser shafts, floor-to-floor, in-wall (non-plenum)

Conductors

• Gauge: 23 AWG (heavy-duty, thicker than standard 24AWG)
• Material: Solid bare copper
• Configuration: Solid (permanent installation)
• Performance: Low resistance, cooler PoE++, minimal attenuation, efficient transmission
• Advantage: Superior performance over long vertical runs compared to 24AWG

Shielding

• Shield Type: S/FTP - Dual shielding (maximum protection)
• Individual Pair Shield: Aluminum-mylar foil on each of 4 pairs
• Overall Shield: Tinned-copper braid (30-60% coverage typical)
• Drain Wire: Yes (integrated, bonds shield to ground)
• Ground Function: Prevents static buildup, maintains signal stability
• EMI/RFI Protection: Class F - Highest level for riser cable
• Signal Quality: Exceptional in high-noise vertical environments
• Crosstalk: Eliminates alien crosstalk between pairs

Insulation

• Material: High-density polyethylene (HDPE)
• Performance: Enhanced CAT7 Class F specifications

Performance

• Maximum Frequency: 1,000MHz (CAT7 Class F standard)
• Data Rate: 10GBASE-T (10 Gigabit Ethernet) up to 100 meters
• Applications: 10GbE, Gigabit Ethernet (1000BASE-T), Fast Ethernet, TP-PMD/CDDI
• PoE Compatible: Yes - PoE++ (IEEE 802.3bt) with extended reach due to 23AWG
• Attenuation: Minimized with heavy-duty 23AWG conductors
• Signal Integrity: Maximum - dual shielding eliminates interference
• Future-Proof: Supports beyond 10G applications with 1,000MHz bandwidth

Jacket

• Material: CMR-rated PVC (flame-retardant)
• Fire Rating: CMR (Communications Riser) - UL listed
• Compliance: UL-CMR fire codes for vertical installations
• Outer Diameter: 7.5mm ± 0.5mm
• Marking: Sequential footage markers
• Safety: Approved for vertical runs between floors in non-plenum spaces
• Durability: Long-lasting in riser environments

Installation Rating

• Indoor Rated: Yes (CMR)
• Outdoor Rated: No
• Suitable Areas: Vertical riser shafts, floor-to-floor runs, in-wall (non-plenum)
• Environment: Non-plenum indoor vertical installations with extreme EMI
• Fire Safety: Flame-retardant for code-compliant vertical runs
• Special Use: High-interference vertical environments requiring CAT7 and maximum shielding

Design Advantages

• Quad Premium Features: CAT7 + CMR rating + S/FTP dual shielding + 23AWG (exceptionally rare)
• CAT7 Class F: 1,000MHz bandwidth, superior to CAT6A
• S/FTP Dual Shielding: Maximum EMI protection available for riser cable
• 23AWG Advantage: Lower resistance than 24AWG for superior 10G performance
• CMR Rating: Fire-safe for vertical installations between floors
• 10G Optimized: Full 10GBASE-T performance to 100 meters
• PoE++ Enhanced: Better power delivery over extended vertical distances
• Signal Quality: Minimal attenuation and interference in long vertical runs
• Compliance: Meets building codes for riser installations
• Ultimate Riser: Top-tier cable for most demanding vertical installations

Use Case Considerations

• Primary Use: Vertical 10G installations requiring maximum performance, fire safety, and EMI protection
• Advantage: Ultra-rare combination of CAT7 + CMR + S/FTP + 23AWG
• Best For: Multi-story buildings with 10G backbone and extreme EMI concerns
• Exceptional Rarity: CAT7 with CMR rating and S/FTP is the pinnacle of riser cable
• Premium Investment: For vertical installations demanding the absolute best across all criteria
• Note: CAT7 requires specialized GG45 or TERA connectors for full performance (can use RJ45 for backward compatibility)

Packaging

• Spool Size: 1000ft wooden spool
• Design: Sturdy for organized, tangle-free vertical pulls

Compliance & Certifications

• Standards: ISO/IEC 11801 Class F (CAT7), ANSI/TIA-568.2-D
• Fire Rating: CMR (Communications Riser) - UL listed
• Certification: UL-CMR verified
• Performance: Class F certified for 1,000MHz

Usually ships in 1 business day.